Product Name Hydraulic Lift Block
Part Number EF-02 / ET-02 /KVS-01/KVS-02
Solenoid Valve Normally Closed/Open
Solenoid Voltage DC12V /DC24V/AC110V/220V/
Oil port thread BSPP1/4” or BSPP3/8” and more
Manifold Material Aluminum 6061-T6
Working Pressure 40bar up to 250bar, setting @180bar
Temperature -20℃-120℃
Flow L/M up to 25L/M
Mounting Flange / M6/M8

Hydraulic lift valve is a compact hydraulic solution to control single acting hydraulic cylinders.
Hydraulic lift valve Blocks system completed with some hydraulic cartridge valves and hydraulic manifold block.
The whole hydraulic lift system can be lift up/down stably and the rate of the decline will not be influenced by the load.
Hydraulic lift valves part numbers are :EF-02 / ET-02 / KVS-01 / KVS-02.

Lift Hydraulic Valve Code: KVS-01 / EF-02
They offer a complete solution for lifting:
→ Control single acting Hydraulic System
→ Hold Pressure for single acting cylinder
→ controlling lowering speed,
→ hydraulic system acting
→ people safety.
→ Emergency Operating release hyd cylinder

Hydraulic Lift Valve Code: KVS-02 / ET-02
How hydraulic lift valve system work:
→ Lift Up: The cylinder will be extended when the electric motor was switched on.
Then hydraulic check valve and hydraulic solenoid valve holds the system pressure,so, the hydraulic cylinder will be stay where it was.
→ Lower Down:
The electric hydraulic pump motor was switched off. For lowering the load solenoid valve was energized to release the hydraulic oil back to the tank from hydraulic cylinder. The lowering speed can be controlled by the flow control valve in hydraulic lift valve system.

Emergency Operating (Options):
In case of electrical power or hydraulic pump failure.
The load can be release by the lowering valve with an emergency button/ needle valve which was operated manually.
Typical applications: hydraulic power packs, hydraulic cartridge valve manifold system ,Hydraulic Lift tables, etc